You have a stubborn patch of traffic-lane grime, a carpet cleaner in the closet, and a bottle of all-purpose concentrate on the shelf. The obvious question is whether one can go in the other.
Can you use all-purpose cleaner in a carpet cleaner machine? Sometimes, and the answer comes down to three things: what your machine's manual says, what your carpet's warranty requires, and how you mix and rinse. For ADVANAGE 20X, Advanage's own Cleaning Tips include a carpet shampoo machine mix, which is one cup of concentrate to every five gallons of water.
This guide walks through that mix, a tank-size cheat sheet, the checks to run first, and a warranty-friendly alternative that skips the tank entirely. If you want to know exactly what is in the bottle before it touches your carpet, our explainer on ingredients and safety data sheets covers it.
Three Checks Before You Fill the Tank
1. Your machine's manual. Some makers want their own formulas in the tank. HGTV's review of a popular portable machine notes that the maker's online FAQ says other solutions are possible but not recommended, while the user manual says non-brand solutions may harm the machine and will void the warranty. Other makers take similar positions, so read the section on cleaning solutions in your own manual and decide with the warranty in mind.
2. Your carpet's care guide. Carpet makers often point homeowners to products certified by the Carpet and Rug Institute. Shaw's care guide, for one, recommends hot water extraction with certified products and advises against household cleaners outside that program. If your carpet is under a stain or soil warranty, check the guide first. The Institute lists its approved products and equipment at carpet-rug.org.
3. A hidden-spot test. Advanage's chart says to test an inconspicuous area for colorfastness and bleeding whenever you use 20X on delicate fabrics such as upholstery, carpet, silk, or leather. Put a few drops of your mix on a closet corner or under a sofa, blot with a white cloth, and check the cloth and the carpet once dry.
Choose Your Path
|
Your situation |
What to do |
|
Your machine's manual allows other solutions |
Use the tank mix below, then run a clear-water rinse pass |
|
Your manual requires the maker's formula |
Keep the tank for the maker's formula or plain water, and pre-treat spots with 20X instead (see below) |
|
Your carpet has a maker's warranty that names approved products |
Follow the care guide, and ask your carpet retailer before using any other product |
|
You are renting a machine |
Follow the rental store's solution recommendation |
For renters, Consumer NZ's guide to choosing a carpet washer puts it plainly: use the manufacturer's recommended solution, because others may stain or bleach carpet, damage the machine or void the warranty.
The Tank Mix: One Cup to Five Gallons
Advanage's instructions for a carpet shampoo machine are short: vacuum the area first to lift loose particles, use one cup of ADVANAGE 20X to every five gallons of water, clean the carpet while concentrating on heavily soiled areas, let it dry, and vacuum again. One cup is 8 ounces, so the ratio works out to about 1.25% concentrate by volume. Here is what that means for common tank sizes.
|
Tank size |
ADVANAGE 20X to add |
Roughly |
|
½ gallon (64 oz) |
0.8 oz |
1½ tablespoons |
|
1 gallon |
1.6 oz |
3 tablespoons |
|
1½ gallons |
2.4 oz |
5 tablespoons |
|
2 gallons |
3.2 oz |
6½ tablespoons |
|
5 gallons |
8 oz |
1 cup |

Fill the tank with water first, add the concentrate, and stir gently rather than shaking so the mix does not froth.
The Rinse Pass That Protects Your Carpet
Detergent left in a carpet can feel sticky and attract soil faster than before. Shaw's care guide says to always follow up with water to remove detergent residue that may become sticky and cause rapid resoiling, and Advanage's spot-cleaning instructions say the same thing in their own words: rinse with clear water.
-
Clean pass. Run the machine over the carpet with the 20X mix, concentrating on heavily soiled areas, with overlapping strokes.
-
Empty and refill. Dump the recovery tank, rinse the tanks, and fill the solution tank with plain water.
-
Rinse pass. Go over the carpet again with plain water to carry off loosened soil and leftover cleaner.
-
Dry and vacuum. Let the carpet dry completely, then vacuum again. Advanage's chart adds that you should not step on carpet until the padding is dry.
If you see suds climbing in the recovery tank, stop, empty it, and switch to the clear-water pass. A lighter mix next time keeps foam in check.

The Warranty-Friendly Alternative: Pre-Treat the Spots, Extract With Water
You can get most of the benefit without putting anything in the tank. Professional carpet guidance describes the same idea: fill the extractor with clean water, spot the carpet with a light coat of all-purpose cleaner, then run the extractor. With ADVANAGE 20X, use the mixes from Advanage's chart:
-
General spot cleaning, 20:1. Spray on, let it stand for 30 seconds, then rinse with clear water and wipe dry.
-
Pet stains, 15:1. Spray the area, rub in circular motions with a nylon brush, and rinse. Stubborn stains can stand for two to three minutes. Our guide to safely removing pet urine stains and odors goes deeper.
-
Tough carpet stains, 7:1. For heavily soiled areas, do not step on the carpet until the padding is dry.
A spray bottle makes it easy to keep a labeled bottle for each strength. Then run the machine with plain water, and you have pre-treated the problem spots and extracted the loosened soil without a non-approved solution in the tank. For the full walkthrough, our carpet and upholstery guide covers the technique step by step.
Which Formula Is Best for Carpets?
All four scents clean the same way, so this is a question of fit.
-
Clear/Odorless has no scent and no dye, and Advanage's starter kit for it is sold as an Unscented Carpet and Upholstery Cleaner. It is the natural choice for light carpets and for anyone sensitive to fragrance.
-
Lavender leaves a gentle floral finish, but the concentrate is dyed purple, so run your hidden-spot test especially carefully on pale carpet.
One Thing 20X Does Not Do
ADVANAGE 20X cleans: it lifts soil, grease, and stains. It is not a disinfectant, and our explainer on how cleaning and disinfecting differ explains what to add if you need that extra step. And never combine 20X with bleach or other chemicals in the tank.
Common Questions
How much does it cost to run ADVANAGE 20X through a carpet machine?
At the one-cup-per-five-gallons mix, a one-gallon tank uses 1.6 ounces of concentrate. That's about 1.25 per tank from a gallon of 20X (99.95), about $1.65 from a 5-Quart Special, and about $2.00 from a quart. A full 5-gallon batch uses 8 ounces, or roughly $6.25 per gallon. One gallon of concentrate covers about 80 one-gallon tank fills.
Is it safe for wool or other natural-fiber rugs?
Treat wool, silk, and other natural fibers with extra care. Advanage tells you to test carpet, silk, and leather in an inconspicuous area first, and rug and carpet makers often specify their own cleaning products for natural fibers. ADVANAGE 20X is an alkaline concentrate, so a hidden-spot test and a plain-water rinse matter even more there. When in doubt, follow the rug maker's care guide.
Can I use it in a small portable upholstery machine?
Check your machine's manual first, as with any carpet cleaner. For upholstery, check the care tag too: a W code means water-based cleaners are fine, and an S code calls for water-free solvents only. Advanage's chart says to test fabric for colorfastness and suggests spraying 20X at 20:1, working it in and wiping dry, with 15:1 for stubborn stains.
A Company That Shows Its Work
ADVANAGE has made this concentrate since 1980, and its Cleaning Tips page lists the mixes in full. If you are unsure about your machine, your carpet, or a particular stain, you can contact Advanage directly before you start.
Ready to try it? Shop the Clear/Odorless Gallon or the Lavender Gallon, both $99.95.
