Skip to content

FREE SHIPPING (Orders Over $150)

FREE SHIPPING (Orders Over $150)

FREE SHIPPING (Orders Over $150)

Best Degreaser for Auto Repair Shops: Engine Bays, Parts & Shop Floors

Quick Summary

Degreasing an Auto Repair Shop

  • The best shop degreaser is the right strength for each job at the lowest cost per mixed gallon, preferably water-based. EPA's guidance for auto repair says aqueous cleaners can meet or exceed solvents on many parts-cleaning tasks, without solvent fire and health liabilities.
  • Advanage's chart for auto work: 1:1 for engine degreasing, 10:1 for rims, brake dust and whitewalls, 20:1 for body and interior, 32:1 for glass, and 1:1 or straight with hot water and a wire brush for oil spots on concrete.
  • Safety: ADVANAGE 20X is water-based and non-flammable per its safety data sheet (flammability 0, concentrate pH 11).
  • Engine bays: Work on a cool engine, cover the alternator, air intake, and fuse box, use a brush, rinse at low pressure (never a pressure washer), and dry before starting.
  • Where the wash water goes: EPA says to dry-clean spills first, mop instead of hosing, and keep emulsified wash water out of storm drains. Emulsifying cleaners can pass oil through an oil/water separator, so confirm your discharge rules.
  • Cost: For a shop using 40 gallons of ready-to-use cleaner a month, 20X costs about $123 from a drum or about $397 from gallon jugs, against roughly $500 to $977 for ready-to-use degreasers.
  • Brands: There is no neutral ranking of "most trusted." Vet any product on its safety data sheet, flammability, compliance, and support.

Best Degreaser for Auto Repair Shops: Engine Bays, Parts & Shop Floors

Nov 16, 2026

Every auto repair shop has the same quiet enemy: oil. It mists off engines, drips onto concrete, bakes onto parts, and rides in on every customer's tires. The right automotive degreaser concentrate keeps benches, floors, and engine bays clean without a shelf of different products, and without turning your shop into a fire or compliance headache.

This guide is for shop owners and service managers. It covers how to match a degreaser strength to each job using Advanage's published mixes, the safe sequence for an engine bay, how to handle shop floors and concrete while staying on the right side of wash-water rules, a cost model you can adapt to your own volume, and how to evaluate any industrial degreaser brand. 

If you are weighing bulk options, our commercial degreaser buying guide and our look at concentrate versus ready-to-use industrial degreasers are good companions.

Match the Job to the Mix: A Shop Chart

Advanage's Cleaning Tips chart lists a mix for most of what happens in a shop. Mixes are written as water to concentrate, and the cost columns use the $99.95 gallon jug and the $1,695.95 55-gallon drum.

Shop task

Mix

How the chart says to do it

Per mixed gallon (jug / drum)

Engine degreasing

1:1

Use a 1:1 dilution

$49.98 / $15.42

Heavy grease on engine parts (brush or soak)

Start at 1:1, then dilute

Begin at the engine mix and step down as the part allows

$49.98 / $15.42

Rims, brake dust and whitewall tires

10:1

Spray on and lift dirt with a scrounge pad

$9.09 / $2.80

Body and exterior

20:1

Wipe with a cloth. For oxidation, use a non-abrasive pad. Rinse and buff dry

$4.76 / $1.47

Interior vinyl, leather and cloth

20:1 (15:1 for stubborn spots)

Spray, wipe, and rinse. Test fabrics first

$4.76 / $1.47

Windows and mirrors

32:1

Wipe as you spray and buff with a cotton cloth

$3.03 / $0.93

Oil spots on concrete or asphalt

1:1, or straight, with hot water

Pour on, work in with a wire brush, then rinse (see the wash-water section)

$49.98 / $15.42

Benches, stainless and tile floors

20:1

Spray or mop, then rinse

$4.76 / $1.47

For vehicle exteriors, the chart adds a rule worth posting by the wash bay: never use it in direct sunlight, and do not let it stand for long periods. Spray on and wipe immediately.

Engine Bays: The Safe Sequence

The chart's engine mix is 1:1, which makes this a concentrate-strength job, so the technique matters more than the product. The common-sense sequence from auto repair practice:

  1. Start with a cool engine in a ventilated bay, and wear eye protection and gloves. The safety data sheet classifies the concentrate as causing serious eye irritation.

  2. Cover the electrics. Bag the alternator, air intake, fuse box, and any exposed connectors, and disconnect the negative battery cable if you are working near them.

  3. Dry-clean first. Brush or blow off loose debris so the degreaser is not wasted on dust and leaves.

  4. Apply the 1:1 mix in sections, keeping the surface wet and working it into heavy grease with a stiff nylon brush. Keep it off painted panels and rinse it promptly.

  5. Rinse at low pressure. Use garden-hose pressure from a low angle. A technician-oriented guide is blunt about it: never use a pressure washer to rinse an engine, because high pressure forces water into electrical connectors and can cause a no-start.

  6. Dry and check. Blow connectors dry with compressed air, uncover everything, then start the engine and let it run.

  7. Capture the rinse water. Handle it under the rules in the next section.

Shop Floors and Concrete: Dry First, Then Degrease

Floors are where shops get into trouble, and where a few habits save the most money. EPA's best practices for auto repair and fleet maintenance are clear about the order of operations: dry-clean spills with absorbents first, avoid hosing down work areas, and mop instead, so you reduce the volume of contaminated wash water. EPA's best workplace practices for automotive repair include a floor-cleanup fact sheet built around that idea.

Here is what that means for a degreaser:

  • Sweep and absorb first. Pick up the bulk of the oil and debris dry, so the cleaner only has to deal with the film.

  • Treat concrete spots in place. Advanage's chart gives 1:1 or straight from the bottle, with hot water, poured on oil and grease spots and worked in with a wire brush. Use it on spots, not the whole floor.

  • Rinse only where the water is collected. The chart says to rinse with a power hose. In a shop, do that only where wash water is contained and directed to the proper drain.

  • Mop the rest. For routine floor care, the 20:1 floor mix with a mop uses far less water than a hose.

One point deserves a plain statement. EPA's oil/water separator fact sheet warns that emulsifying cleaning compounds disperse oil in wash water and can make separators ineffective, letting oil pass through to the sewer. ADVANAGE 20X works by emulsifying grease, so reserve it for contained areas, benches, engine bays, and parts, and confirm with your sewer authority before washing emulsified oil to any drain. Never let it reach a storm drain, which in most places carries only rain.

What Does It Cost? A 40-Gallon-a-Month Shop

Here is a simple monthly model. Suppose your shop goes through 40 gallons of ready-to-use cleaner a month, split by job: 4 gallons at 1:1 for engines and parts, 6 gallons at 10:1 for wheels and brake dust, and 30 gallons at 20:1 for floors, benches, and exteriors. You can swap in your own split.

Approach

Monthly cost for 40 gallons

Ready-to-use degreaser at roughly $12.49 to $24.43 a gallon

about $500 to $977

20X from gallon jugs, blended mix

about $397

20X from a 55-gallon drum, blended mix

about $123

That model uses about 4 gallons of concentrate a month, so four gallons last about a month and a drum lasts about 14 months. The cost of the heaviest jobs is where concentrate is least cost-effective, since a 1:1 mix from a gallon jug is $49.98 per mixed gallon. 

The savings come from the lighter work, which is most of the volume in a typical shop, and from the drum, where even the 1:1 mix is about $15.42 per gallon. For the wider math, our look at whether concentrates are worth it walks through the economics. 

If you would rather test the formula first, the Citrus Starter Kit pairs a quart with a free mixing applicator; the Citrus 5-Quart Special is $164.95, and you can browse every size in the gallons and drums collections.

Dilution Control That Survives a Busy Shop

A concentrate only saves money if every tech mixes it the same way. These habits keep it consistent:

If your work extends beyond the shop floor to vehicle fleets, our look at how one cleaner handles fleet, foodservice, agriculture and facilities is relevant, and our commercial and industrial cleaning overview covers the wider range of industrial uses. 

Our guide to removing grease and oil stains from kitchens, garages and driveways goes deeper on garage floors.

What Industrial Degreaser Brands Are Most Trusted in the Automotive Repair Industry?

No independent, published ranking names "the most trusted" degreaser brand for auto repair, and any list that claims to is really a list of what a particular distributor sells. A more useful answer is how shops decide whom to trust. Run any brand, including ours, through these five checks:

  1. A current safety data sheet. A trustworthy supplier publishes one for every product and answers questions about it.

  2. Flammability and fire load. EPA notes that solvents create environmental, worker health, and fire liabilities for a shop. A product rated non-flammable simplifies your fire plan.

  3. Compliance fit. Ask how it fits your state's air rules, your discharge permit, and your parts-washer setup.

  4. A track record you can verify. Ask for references from shops of your size, and check how long the company has been in business. Advanage has made its concentrate since 1980.

  5. Support when something goes wrong. Can you reach a person who knows the product?

For context, purple-colored degreasers such as Purple Power and Zep Industrial Purple are widely sold, and their labels and manufacturer guidance point to engines, underbody, and machinery. Which one is right depends on your jobs, your surfaces, and your rules, not on a brand's reputation.

Common Questions

What is the best degreaser for automotive parts?

A water-based (aqueous) cleaner is the best starting point for many parts. EPA's best workplace practices for automotive repair say using solvents creates environmental, worker-health, and fire liabilities, and its case studies show that aqueous cleaners can meet or exceed solvent performance across a wide variety of repair operations. Check that your parts washer's chemistry requirements and your OEM guidance allow the cleaner, and ask Advanage how to use 20X in your setup.

What is the strongest degreaser on the market?

No independent test ranks every degreaser on one scale, and "strongest" is not the same as "best." The most aggressive products are usually flammable solvents or highly alkaline cleaners that carry more fire, fume, and handling risk. Choose the mildest product that removes your soil, then raise the strength only where the job needs it. A concentrate lets you do that with one bottle, from 20:1 up to 1:1.

What is the best cleaner for the engine bay?

Look for a water-based degreaser you can dilute, brush in, and rinse at low pressure. Keep it off painted panels and rinse promptly, and avoid acid-based cleaners on aluminum and painted parts unless the product label allows them. Advanage's chart gives a 1:1 mix for engine degreasing. Follow the safe sequence above, and let the bay dry fully before you start the engine.

What is the best solvent for cleaning engine parts?

That depends on the part and on your shop's rules, and it is a question about solvents, which ADVANAGE 20X is not. It is a water-based emulsifying cleaner. If you do use solvents, shop best-practice guides favor non-chlorinated products such as citrus-based solvents, which still carry flammability, so store them in approved containers, keep them in self-contained sinks, and use a licensed hauler for waste. For shops moving away from solvents, a water-based system is the direction EPA recommends.

A Family Company That Knows Shops

ADVANAGE has made this concentrate since 1980, and its team can help you plan mixes, quantities, and a drum setup for your shop. You can contact Advanage directly with the jobs and surfaces you handle.

Ready to price your shop? Shop the Citrus Gallon ($99.95) or the Citrus 55-gallon drum ($1,695.95), or request a quote for case quantities on the Commercial page.

Frequently Asked Questions

What is the best degreaser for automotive parts?

A water-based (aqueous) cleaner is the best starting point for many parts. EPA's best workplace practices for automotive repair say using solvents creates environmental, worker-health, and fire liabilities, and its case studies show that aqueous cleaners can meet or exceed solvent performance across a wide variety of repair operations. Check that your parts washer's chemistry requirements and your OEM guidance allow the cleaner, and ask Advanage how to use 20X in your setup.

What is the strongest degreaser on the market?

No independent test ranks every degreaser on one scale, and "strongest" is not the same as "best." The most aggressive products are usually flammable solvents or highly alkaline cleaners that carry more fire, fume, and handling risk. Choose the mildest product that removes your soil, then raise the strength only where the job needs it. A concentrate lets you do that with one bottle, from 20:1 up to 1:1.

What is the best cleaner for the engine bay?

Look for a water-based degreaser you can dilute, brush in, and rinse at low pressure. Keep it off painted panels and rinse promptly, and avoid acid-based cleaners on aluminum and painted parts unless the product label allows them. Advanage's chart gives a 1:1 mix for engine degreasing. Follow the safe sequence above, and let the bay dry fully before you start the engine.

What is the best solvent for cleaning engine parts?

That depends on the part and on your shop's rules, and it is a question about solvents, which ADVANAGE 20X is not. It is a water-based emulsifying cleaner. If you do use solvents, shop best-practice guides favor non-chlorinated products such as citrus-based solvents, which still carry flammability, so store them in approved containers, keep them in self-contained sinks, and use a licensed hauler for waste. For shops moving away from solvents, a water-based system is the direction EPA recommends.

To top